BF8L413FC Engine

You are here: Home » Products » Huachai Deutz Engine » FL413 Series » BF8L413FC Engine
Engine Model: BF8L413FC
Engine Type: 6 Cylinders, V type
Displacement: 12.763 L
Rated Speed: 2500 rpm
Rated Power: 235kW
Max. Torque/Speed: 1102N.m/1800rpm
Aspiration Method: Turbo & Intercooled
Emission Standard: Euro II
Fuel Consumption: 218g/kW.h
Packing Size(L*W*H): N/A
Gross Weight: N/A
Lead Time: 15-30working days
Payment Terms: T/T ,L/C
DCEC EQB140-20 Automotive Engine

BF8L413FC Construction Engine

 


BF8L413FC Construction Engine

Deutz technology, V-engine, including the following 4 kinds: 6-cylinder, 8-cylinder, 10-cylinder and 12-cylinder.The power is from 102kw to 410kw.

One cylinder one head structure, without cooling water circulation system, both of which can distinctly make the external pipes less and save maintenance time and also can reduce the potential possibilities of failures.

It can be widely used in the high temperature, cold, arid and water deficient regions.

The inlet heating device can keep good start at temperature of -35℃

Engine Model
Rated power/ Speed kW /r/min
Max. Torque/Speed N.m / r/min
Aspiration
Emission
F8L413F 174kW/2500rpm 760N.m/1500rpm Turbocharged & Intercooler Euro II
F10L413F 217kw/2500rpm 950N.m/1500rpm Turbocharged & Intercooler Euro II
F12L413F 261kw/2500rpm 1120N.m/1500rpm Turbocharged & Intercooler Euro II
BF8L413FC 235kw/2500rpm 1102N.m/1800rpm Turbocharged & Intercooler Euro II
General Information of BF8L413FC Construction Engine
Engine Model BF8L413FC
Engine Type 6 Cylinders, V type
Displacement 12.763 L
Bore*Stroke 125*130
Compression Ratio N/A
Net Weight (with flywleel & alternator) 970 KG
Overall Diemension(L*W*H) 1260mm*1072mm*1030mm
Technical Specification of BF8L413FC Construction Engine
Certification Euro II
Aspiration Turbo & Intercooled
Fuel Pump N/A
Start Mothod Electric Start
Electrical System 24v
Performance Data of BF8L413FC Construction Engine
Rated Power 235kW
Max.Torque/Speed 1102N.m/1800rpm
Fuel Consumption @ Rated Power 218g/kw.h
Idel Speed 600rpm

Performance Curve of BF8L413FC Construction Engine

DCEC-Auotomotive-Engine-ConfigurationA complete engine with all necessary accessories mainly includes followings:

Fuel Injection System Flywheel Flywheel Housing Turocharger
Intake Manifold Exhaust Manifold Starter Motor Alternator
Clamp & Hose Manual & Documents Oil Filter & Fuel Filter Water Pump & Oil Pump
Fuel-Cutoff-Solenoid

Working together with our business partner Huachai-Deutz, we are able to provide a complete engine power pack for all different kinds of automotive manufacturers in all over the world. We are providing design, supply, installation and commissioning, for more information, please visit www.Huachai-Deutz.com. Fast Transmission For auotmotive application option, we can provide transmission.

User Guidelines

1. As a rule, engines are delivered without oil. Pour lube oil into the oil filler neck(arrow).

2. You should take new engine checking and mileage compulsory maintenance when beyond the running travelled distance.

3. You should be clearly that you can’t modify the structure of the engine or vehicle.

4. if you need to change the spare parts, make sure that you use original spare parts. After-market parts might damage your engine.

5. Unscrew filling cap, unscrew vent plugs.Add coolant up to filling-up limit mark. Pay attention to the coolant outlet, screw it if spilling.Screw filling cap.Start engine and warm up until thermostat opens (the coolant line from fan unit to thermostat warming obviously).Switch off engine.For the first running, check coolant level and top up as required.

6. Checking Battery and Cable Connectors. After the engine has been prepared, let it run for about 10 minutes without load. Check the engine for leaks. Check the oil level and top up if necessary. Tighten the V-belt. During the break-in phase – about 200 operating hours – check the oil level twice a day. After the engine is broken in, checking once a day will be sufficient.

a. Before starting, make sure that nobody is standing in the immediate vicinity of the engine or driven machine. After repair work, check that all guards have been replaced and that all tools have been removed from the engine.

b. When starting with glow plugs,do not use any other starter substance(e.g. injection with start pilot). Doing so could result in an accident.

c. Never start the engine with speed governor removed. Disconnect battery.

Data Sheet
Diagram
Maintenance
Operation Manual
Order Information
Parts Catalog

Other Items in this category
Request Form
Name: 
*
Email: 
*
Country: 
*
Message: 
Verification:  2 + 4 = ?
Please enter the answer to the sum & Click Submit to verify your registration.
 
Copyright 2008-2022 EMAC POWER LTD All Rights Reserved.
Sitemap | Top↑